Static grass tool

Here's how we can save coins (there, not 100 Euros) for equipment sprinkles ofgrass. Here I use this product-electric fly swatter. I personally buy it from Amazon for 4pounds, but I think in the summer can be found throughout Bulgaria. Add a metalstrainer and the nearest store for household and take 20-30 minutes to have this miracle.

Unwind three screws remove the handle and yellow plastic fly swatter itself. Brown and metal wires are tied to the wire mesh in yellow plastic (taht is easely disassembled) and we should untie them. Zero is unprotected wire, and brown is high-voltage

Put an insulating tube of unprotected wire strainer because I have a metal part.Solder wire of 30 cm which also has hose, then pull the tubing so as to hide glue.

Tie the brown wire to the strainer and solder it.

Make the hole in the strainer. For better stability put the pieces of cardboard on the bottom side. The edge of the strainer is fixed to the plastic shank of the fly swatter.

Assemble shank.

A nail to the neutral wire.

Here are the results .. Although the grass I use is pretty short hair, and myshooting skills are limited ..

USE:

Nail is stuk in to the surface that we want to be covered. The glue is around and makes possible static electricity to steep grass.

Used grass on the picture- Noch (08310). Many manifacturers make grass in different colores and lenght. You can mix different colors to make required for your layout color.

The grass for that purpose are noticed on top with

Typically, these grasses are marked that are applying for such ... Packages of Noch writes: "Ideal fur Gras-master", if a woodland is marked with the name Static grass flock

Video how to use it:
http://www.youtube.com/watch?v=OYSAK1ezou4

And this movie is in three sets of processing and use of the appliance:

http://www.youtube.com/watch?v=EAEmcqc-yIc&feature=relmfu