Decoder installation on V180 for TT(1:120)

Locomotive: Tillig V180 (02665)
Decoder: Flieschmann w/o sound NEM651 (6 Пинов)- FLM-685302/ w/o cable
Digital format: DCC
Interface: Yes
Milling: No
Difficulty: Easy

Open the hollow. Brake the rectangular part of the board shown on the picture.

Below you can see the digital Interface (6 pins)

Put the decoder. For testing I use the decoder with cable. If everything is Ok I'll replace finally with thedecoder w/o cable