Decoder installation on BR243 for TT(1:120)

Locomotive: Tillig BR 243 (02342)
decoder: Flieschmann w/o sound NEM651 (6 pins)- FLM-685302/ w/o cable or FLM-685402/ 35 мм cable lenght
Digital format: DCC
Interface: No
Milling : No
Diffculty: Easy to medium

Open the hollow. Desolder the wire frm the roof.

Brake the rectangular part of the board. Desolder the engine from the board and two of the wires to make easy access to the botom part of the board.

Tin the decoder pins and the board paths.

The best result could be reached if decoder w/o cable is used with pind direclty on it.

Solder the pins to the board's paths.

Тествам

Beacuse the roof part is very closed to the board no space available for the decoder could be found there. I remove the back part of the cabin and put decoder after insulation there.

And let's go to play on rails