Decoder installation on BR101 for TT(1:120)

Locomotive: Tillig BR101 (02306)
Decoder: Flieschmann w/o sonud NEM651 (6 pins)- FLM-685302/ w/o cable or FLM-685402 s 35 mm cable lenght
Digital format: DCC
Interface: No
Milling: No
difficulty: Easy

Open the hollow and brake the rectangular part of the board

Open the board after desoldering of two of the wires (+)

Tin the paths of the board and the pins of the decoder. Solder pins to paths. If you use the decoder w/o cables it will be placed exellent in the hole of the board.

Testing....

No available space between the roof and board for the decoder... Insulating the decoder and put it in the hole of the board between the wall and the cardan

И сме готови